 |
| SAMSUNG S6 |
The best reliable way to fix Samsung S6 SM-G920F Update error after a failed system update – Fast reliable way to repair Samsung S6 update error after partial update.
Most Samsung
users experience the same problem where their phones fail to boot again or
phone not charging, freezing and unresponsive touch screens. So today I want to
focus on Samsung S6 SM-G920F which failed to boot after an error occurred
during update making it difficult to reboot the Samsung smart phone again.
There are
several things which can occur during system update which can interrupt the
update process then causing major problems to your Samsung phone. One of the
things can be weak internet connection, no enough storage space on the device
sometimes and or no enough data bundles to complete the update. Remember that
is a good thing to make sure that you have enough data bundles at least 3Gig
when you update Samsung device running android 6.0 and above.
Also make
sure that the internal rom has enough space to keep the downloaded updates because
when the update starts, is not a good entire to have anything which will
interrupt it. Sometimes is not because the update was interrupted but because
of some incompatibilities in the update software itself in case the update
completed 100% download then after installation the device fail to boot.
Now I am
going to show you how you can easily fix Samsung s6 sm-G920f boot error after
system update or after an interrupted update.
WATCH VIDEO INSTEAD - SUBSCRIBE YOUTUBE >>
The first
thing you will need is a tool called Odin, Samsung S6 SM-G920F stock Rom
(Updated) and Samsung drivers for your phone to communicate with your computer.
If you don’t know how to install phone drivers you can check ”How To InstallUnsigned Drivers On Windows”, sometimes high end smart phones like Samsung will
automatically install itself but if it fails then you will need the drivers for
it to communicate easily with your PC.
Now download
the stock rom or update firmware, Odin for Samsung and the drivers, then run Odin
as administrator on your PC. Connect your Smart phone via USB port then it
should appear on a certain communication port in Odin dashboard, then select
PDA from Odin application and locate the .tar file in the extracted stock rom
file.
Now Odin
software will start analyzing the .tar file for integrity the and you should
see a successful check on Odin then press “Start” from Odin to begin with the
update.
Wait until
the process completes then your phone will restart automatically and your phone
will open.
What If it
does not open after doing the above steps?
Don’t worry,
as long as the Error is gone now switch off the phone and switch it “ON” again
pressing “Power+Volume Up+ Home Key” to access the “recovery menu”. From the
list choose “Factory Reset” then select “Yes” to wipe all user data on your phone.
Remember that all data stored on your phone except the SD card will be
permanently deleted. Reboot your phone and setup your phone the way you will do
setting up a new phone because you wiped everything.
Congratulations, your Samsung S6 SM-G920F should work just fine.